UniSlope 1K Brushed Brass Short Linear Drain Wetroom Shower Kit
Order now for dispatch in approximately 4 weeks.
Product Description
Tailored for integration into bathrooms and shower spaces of any dimension, the Unislope 1K Wetroom kit empowers you to fashion a wet room with a wall-adjacent drain, facilitating a seamless one-way slope without the necessity to cut tiles towards the drain. This innovative design streamlines the process of achieving level access, eliminating the requirement for a shower tray.
UniSlope's designs incorporate a built-in slope within the drain to prevent water accumulation, complemented by substantial flanges for a secure installation. The kit also boasts a 12mm stainless steel frame, mitigating flexing concerns, and features a removable, easily cleanable trap with a 50mm waste discharge capacity.
Inclusive in the Wetroom Shower Tray Base Kit are:
- Wall-mounted stainless steel linear drain
- Preformed wet room tray
- 3kg waterproofing membrane
- 25-meter reinforcement tape
- 1-liter primer
- Sealed gasket
- 50mm water seal
- Construction glue
Linear Drain Features:
- Solid stainless steel panel, available with or without a frame
- Durable brushed brass PVD coating (alternative finishes offered)
- Discharges 48 liters of water per minute per outlet
- Easily cleaned by removing the panel and trap
- Main drain body pressed from 1.5mm stainless steel
- Stability and safety ensured with large metal surface flanges for secure waterproofing
- Internal channel within the drain prevents stagnant water
- Approved for both wooden and concrete construction
- Outlet can be rotated 360°
- BBA approved
Wetroom Shower Tray Base Kit Features:
- 100% waterproof construction
- Extremely low installation height
- Preformed tray with built-in gradient for slope
- Suitable for small and large tiles with a minimum thickness of 8mm
- Compatible with underfloor heating
- Can be trimmed (refer to technical information in the product downloads section)
Suitable For:
- Wood or concrete subfloor
- Tiled floor finish
- Wet rooms
- Level access
- Raised on platform
- Underfloor heating
Not Suitable For:
- Vinyl floor finish
- Micro-cement
- Fitting directly on joists
Wetroom Shower Tray Base Specifications:
- Product Type: Shower tray base for wet rooms
- Shower Base Material: Polystyrene foam (XPS)
- Shower Base Shape: Square & Rectangle
- Color: Grey with yellow
- Thickness: 19 to 30mm
- Waste type: Linear (Rectangle shape)
- Waste position: Against the wall (refer to images)
- Drain: Horizontal
- Drain grate material: Stainless steel
- Guarantee: 10-year manufacturer's guarantee
Additional Details:
- UniSlope 1K wetroom/shower bases lack self-support and require a supportive sub-floor for stability. To establish a secure base for a level-entry configuration on a suspended timber floor, it is necessary to construct a sub-floor between the joists, utilizing materials such as 18mm plywood.
- The waterproofing kit encompasses an easy-to-apply, solvent-free paint-on liquid membrane that dries seamlessly as a continuous sheet. This design ensures flexibility and adaptability to building movements, allowing it to stretch and move harmoniously.
- Certified to international standards, the kit holds an ETAG 022-1 certification and EC1 Plus approval. Additionally, it complies with EN 1253 standards.
- Please note that the tiles, shower, and glass enclosures depicted in product photos are not part of the kit and must be obtained separately.
- View Less
Product Description
Tailored for integration into bathrooms and shower spaces of any dimension, the Unislope 1K Wetroom kit empowers you to fashion a wet room with a wall-adjacent drain, facilitating a seamless one-way slope without the necessity to cut tiles towards the drain. This innovative design streamlines the process of achieving level access, eliminating the requirement for a shower tray.
UniSlope's designs incorporate a built-in slope within the drain to prevent water accumulation, complemented by substantial flanges for a secure installation. The kit also boasts a 12mm stainless steel frame, mitigating flexing concerns, and features a removable, easily cleanable trap with a 50mm waste discharge capacity.
Inclusive in the Wetroom Shower Tray Base Kit are:
- Wall-mounted stainless steel linear drain
- Preformed wet room tray
- 3kg waterproofing membrane
- 25-meter reinforcement tape
- 1-liter primer
- Sealed gasket
- 50mm water seal
- Construction glue
Linear Drain Features:
- Solid stainless steel panel, available with or without a frame
- Durable brushed brass PVD coating (alternative finishes offered)
- Discharges 48 liters of water per minute per outlet
- Easily cleaned by removing the panel and trap
- Main drain body pressed from 1.5mm stainless steel
- Stability and safety ensured with large metal surface flanges for secure waterproofing
- Internal channel within the drain prevents stagnant water
- Approved for both wooden and concrete construction
- Outlet can be rotated 360°
- BBA approved
Wetroom Shower Tray Base Kit Features:
- 100% waterproof construction
- Extremely low installation height
- Preformed tray with built-in gradient for slope
- Suitable for small and large tiles with a minimum thickness of 8mm
- Compatible with underfloor heating
- Can be trimmed (refer to technical information in the product downloads section)
Suitable For:
- Wood or concrete subfloor
- Tiled floor finish
- Wet rooms
- Level access
- Raised on platform
- Underfloor heating
Not Suitable For:
- Vinyl floor finish
- Micro-cement
- Fitting directly on joists
Wetroom Shower Tray Base Specifications:
- Product Type: Shower tray base for wet rooms
- Shower Base Material: Polystyrene foam (XPS)
- Shower Base Shape: Square & Rectangle
- Color: Grey with yellow
- Thickness: 19 to 30mm
- Waste type: Linear (Rectangle shape)
- Waste position: Against the wall (refer to images)
- Drain: Horizontal
- Drain grate material: Stainless steel
- Guarantee: 10-year manufacturer's guarantee
Additional Details:
- UniSlope 1K wetroom/shower bases lack self-support and require a supportive sub-floor for stability. To establish a secure base for a level-entry configuration on a suspended timber floor, it is necessary to construct a sub-floor between the joists, utilizing materials such as 18mm plywood.
- The waterproofing kit encompasses an easy-to-apply, solvent-free paint-on liquid membrane that dries seamlessly as a continuous sheet. This design ensures flexibility and adaptability to building movements, allowing it to stretch and move harmoniously.
- Certified to international standards, the kit holds an ETAG 022-1 certification and EC1 Plus approval. Additionally, it complies with EN 1253 standards.
- Please note that the tiles, shower, and glass enclosures depicted in product photos are not part of the kit and must be obtained separately.
- View Less
Delivery Information
Bathroom Outlet delivers to the Republic of Ireland and Northern Ireland.
We can arrange international deliveries upon request.
- Click & Collect (Sandyford, Dublin): Free
- Small Parcels: €9.99
- Large Parcels: €60
Free Delivery on orders over €699
Note: Please note that large parcels could be delivered on a pallet outside your property to the nearest accessible location.
Visit our delivery policy page for more details.
Returns
We offer a 14-day flexible returns policy. You may return any stocked goods at any time before and up to 14 days after receiving the goods. Visit our returns policy page for more details.